Guide to program Volvo C30 2011 year semi-intelligent key with Lonsdor K518ISE key programmer.
Original key: 5 buttons semi-smart key
Chip type: 48 chip
Key ID and security code: Required
Device to read CEM data: Xhorse VVDI Prog programmer
Device to program key: Lonsdor K518ISE key programmer
Step 1: Read CEM data
Disassemble the CEM module behind the car glove box
Open CEM module and find CPU chip
K518 will show you wiring connection to read CPU EEPROM and FLASH data by VVDI prog programmer
Save eeprom and flash data
Send eeprom and flash data to Lonsdor technician firstname.lastname@example.org, they will generate and send you the license file.
Connect K518ISE host with laptop via USB cable. Copy the license file to K518 “customfile” folder.
Step 2: Program Key
Connect Lonsdor K518 host with vehicle via obd diagnostic socket
Select Volvo->C30->Program Smart Key->Add a key
Call lonsdor engineer or contact via email above to get the license file
Select license bin file to be uploaded
Insert new key to be programmed into card slot
Turn ignition to ON position
Check the remote ID and security code which stamped on the remote key box
select 24-digit security code
Follow K518 prompt to enter 8-digit remote key ID and confim
Then enter 24-digit remote security code and confirm
Program volvo C30 remote key success.
Test the remote key.