Lonsdor K518 Read Passat B5 2004 Pin Code and Program Key

Guide to read pin code and program key on a VW Passat B5 2004 year 3th immobilizer by using Lonsdor K518ISE key programmer.

 

Key information:

Original key: 3-button folding remote key

Frequency: 433MHz

Chip type: 48 Chip

Device to program: Lonsdor K518 key programmer

 

Procedure:

Step 1: Read Pin Code

Connect K518 host with vehicle via OBD diagnostic socket

Turn ignition ON

Select Immobilizer-> VW-> 2th & 3th Immobilizer->Read Pin Code-> Instrument

k518-passat-b5-1

k518-passat-b5-2

k518-passat-b5-3

Lonsdor K518ISE  read ECU version and pin code success

k518-passat-b5-4

Write download pin code

 

Step 2: Program key

Select Program key-> Instrument

k518-passat-b5-5

k518-passat-b5-6

Lonsdor K518 requires 5-digit pin code to access

Enter pin code and confirm

k518-passat-b5-8

k518-passat-b5-9

Enter number of keys to be programmed

k518-passat-b5-10

select program key from 21 position

k518-passat-b5-11

Turn ignition off. Insert keys to be programmed one by one and turn ignition on for at least 5 seconds

Press YES when all keys has changed

Note: If remote control working after programming, but cannot start car, and dashboard displays “Immobilizer activated” message, insert key but not start engine, try again after a few minutes.

k518-passat-b5-12

Done!

http://www.obdii365.com/producttags/lonsdor-k518ise.html